Universal Series

From $3495.00

Changing the face of HVAC
More comfort in colder climates.

The MRCOOL Universal Heat Pump is a highly efficient heating and air system that offers reliable, accurate and affordable temperature control. Quick Connect precharged lines can be installed in minutes without special tools or training.

Watch the installation and performance videos in the videos tab.

Modern Climate control for your comfort
Up to 20 SEER and 10.5 HSPF

High Efficiency
NOT Your Typical Heat Pump
Heating‡: 100% Capacity at -5°F and 78% Capacity at -22°F*
Cooling‡: 100% Capacity at 115°F and 78% Capacity at 130°F*

Easy Installation
Kink Resistant for Easier Bending During Installation

100% Accurately Precharged R410A Refrigerant standard sizes: 15 ft, 25ft, 35ft, 50ft

Optional No-Vac® Couplers can be used to combine two standard line sets to extend the length if needed.

Simple to Use, Leak Proof, and Screw-on Quick Connect Valves do not require vacuuming.

Quicker Installation than Conventional Line Sets.

Strong 3/4" Gator-Flextra™ UV Protective Insulation provides extra protection against sun damage, weather erosion, or destruction from animals or insects.

Please allow 2-4 weeks for delivery
info@diyheatpumps.ca

Videos



Tech Specs

Manuals

Find brochures, manuals and warranty information at:
mrcool.com/documentation

8 reviews for Universal Series

  1. Murray

    Amazing system, very easy to install and quick delivery. It was 1/3 rd of the cost of the quote we had from a local company. Would recommend.

  2. Samual

    Cant’ say enough about these guys – super helpful and offered great tech support. Glad I went with them and wasn’t ripped off by the local HVAC guys. We saved about $15K on a 3 ton Universal system. Works amazingly well.

  3. Martin

    A absolutely amazing system – it was relatively easy to install and worked perfectly well with our nest thermostat. It delivers all the way down to about – 30C which is perfect for our cold winters here in Ontario. We highly recommend the additional heat kit, as it’s not expensive. Highly recommend these guys – the best prices by far.

  4. Simon

    Super easy to fit – the Universal worked out the box with our existing thermostat. The High ESP model was perfect for our existing ductwork – we had to play around with it a bit – but it works great! We recommend buying the heat kit – it wasn’t very expensive but was worth it.

  5. Liam

    Our existing system gave up the ghost – so we decided on a MR Cool DIY Universal – these guys were super helpful and are highly recommended. It’s working out great so far – no complaints.

  6. Paul

    Amazing customer service and technical support – especially with the ducting calculations. We saved a lot of money and are glad we took the plunge by doing it ourselves. The professional install quotes we were getting were ridiculous. We’d recommend doing it yourself to anyone and Mike the ducting/sheet metal guy they recommended was awesome. I think we did it for about a third of the cost we were quoted and got a $2k rebate.

  7. David

    Best decision ever – highly recommended – super easy to install. Worth the wait.

  8. Colin

    After power-up, the unit was less than half the noise of my old unit. When I went outside I thought the outside condenser wasn’t working. I couldn’t hear it until I was within 6 foot of it.
    How nice. Replaced our old Trane forced air system. As an electrician, I fitted it myself – couldn’t be happier.

    I rate it 5 Stars. Great company, great unit.

    • admin

      Thanks for the review Colin glad you got it installed. Certainly ideal for your climate in Alberta. Yes, it’s easy to replace an existing forced-air system yourself with our pre-charged line sets. Great job – well done!

Add a review

Your email address will not be published.

(8 customer reviews)
Category: